| Sensor |
| Optical Format |
1/3 inch |
| Resolution |
W VGA |
| Active Area |
4.51 mm (H) x 2.88 mm (V) |
| Pixel Array |
752 (H) x 480 (V) |
| Chroma |
Available in Mono and RGB (Bayer)
|
Sensitivity
|
| Pixel Size |
6 x 6 µm |
| Dynamic Range |
>55 dB (linear mode); >110 dB (high dynamic range) |
| Responsivity |
4.8 V/lux-sec |
| Min. Detectable Light |
<.1 lux (mono), 5 lux (RGB) |
| Spectral Range |
450 - 1050 nm |
| Quantum Efficiency |
>35% (@ 850 nm) |
Frame Rate & Readout Modes
|
| Area Read |
Full image and sub-area (any rectangular region of the Sensor) |
On-chip Binning
|
2x2 or 4x4 pixel binning performed in the sensor
|
| Area Mask Binning |
Arbitrary binning pattern executed in the MityDSP |
| Frame Rate |
60 fps (full resolution), 1000 fps (64 high x 512 wide) |
| On-board Processor (MityDSP) |
| CPU Engine |
Available with floating-point DSP, FPGA, FLASH, SDRAM (up to 32 M byte) |
| Full featured SDK |
Supports rapid application development |
| Communications |
| USB |
Supports USB 2.0 |
| Ethernet |
Supports full TCP / UDP stack over 100 Base T |
| Digital I/O |
Supports external triggering and control of outboard devices |
| Mount |
| Mounts |
Standard C and CS lens mount
|
| Environment |
| Temperature |
-30° C to +70° C |
| Humidity |
10% to 90% non-condensing |
| Electrical |
| Voltage |
110V / 220V or 9-24 VDC |
| Mechanical |
| Dimensions |
98 mm x 100 mm x 90 mm (3.86" x 3.94" x 3.54") |
| Weight |
750 g (26 oz.) |
