| Sensor |
| Type |
Front-illuminated |
| Pixel Size |
26 um x 26 um |
| Image Area |
26.6 mm (H) x 6.7 mm (V)
|
| Pixel Array |
1024 (H) x 256 pixels (W)
|
Well Capacity (typ.)
|
500 ke¯
|
Dark Current (typ.)
|
.05 e¯/pixel/sec (@ 0 °C) |
| System Noise |
| Noise (typ.) |
12.4 e¯ RMS @ 500 KHz |
| Data Acquisition & Binning Modes |
| Area Read |
Full image and sub-area (any rectangular region of the CCD) |
| Full Binning |
Standard CCD binning (all CCD rows summed in read-out register) |
| Partial Binning |
Some rows summed in CCD and partial results summed in MityDSP |
| Area Mask Binning |
Vertical and horizontal binning in MityDSP |
| Multiple Binning Patterns |
Multiple Binning patterns stored in memory and swapped in as directed on a cycle basis |
| On-board Processor (MityDSP) |
| CPU Engine |
Floating-point DSP, FPGA, FLASH, SDRAM (up to 32 MByte) |
| Full featured SDK |
Supports rapid application development |
| Applications |
Peak finding, signature analysis, general purpose computing, etc. |
| Cooling |
| Type |
Thermo-electric to -40 °C (from 20 °C ambient) +/- .1 °C |
| Communications |
| USB |
Supports USB 2.0 |
| Ethernet |
Supports full TCP / UDP stack over 10 / 100 Base T |
| Digital I/O |
Supports external triggering and control of outboard devices |
| Mount |
| Mounts |
Several standard mounts available. Please contact factory |
| Environment |
| Temperature |
-20 °C to +30 °C |
| Humidity |
10% to 90% non-condensing |
| Electrical |
| Voltage |
110V / 220V or 12-24 VDC |
| Mechanical |
| Dimensions |
98 mm x 100 mm x 90 mm (3.86" x 3.94" x 3.54") |
| Weight |
750 g (26 oz.) |
Data Sheet
))