Back illuminated CCD camera - MityCCD-H7031

Standard back-thinned camera featuring high sensitivity, low etaloning, and a built-in thermoelectric cooler. Camera is available in multiple OEM configurations.

             Features Applications   Data Sheet
            ► Back-illuminated sensor
► Raman Spectroscopy Technical Library
            ► Large pixel size: 24 x 24 micron ► Low-light Imaging Request Information
            ► High quantum efficiency ► Industrial Inspection
 
            ► Wide spectral response range ► Semiconductor Inspection
 
            ► TE-Cooled to -15 °C ► Portable Scientific Imaging
 



                      

     Camera Models
Camera Model Image Area Active Pixels
  Width (mm) Height (mm) Horizontal Vertical
 MityCCD-H7031-0906  12.288  1.392  512  58
 MityCCD-H7031-0907  12.288  2.928  512  122
 MityCCD-H7031-0908  12.288  6.000  512  250
 MityCCD-H7031-1006  24.576 1.392  1024  58
 MityCCD-H7031-1007  24.576  2.928  1024  122
 MityCCD-H7031-1008  24.576  6.000   1024
 250


 Specification 
 Type  Back-illuminated
 Pixel Size  24 um x 24 um
 Image Area  Various - See Camera Models above
 Pixel Array  Various - See Camera Models above
 Well Capacity  320 ke¯ (typical - vertical)
 Well Capacity  1000 ke¯  (typical - horizontal)
 Dark Current  10 e¯/pixel/sec  (typ. @ 0 °C)
 System Noise 
 Noise (typ)  12 e¯ RMS @ 500 KHz
Data Acquisition & Binning Modes
 Area Read  Full image and sub-area (any rectangular region of the CCD)
 Full Binning  Standard CCD binning (all CCD rows summed in read-out register)
 Partial Binning  Some rows summed in CCD and partial results summed in MityDSP
 Area Mask Binning  Vertical and horizontal binning in MityDSP
 Multiple Binning Patterns  Multiple Binning patterns stored in memory and swapped in as directed on a cycle basis
 On-board Processor (MityDSP)
 CPU Engine  Floating-point DSP, FPGA, FLASH, SDRAM (up to 32 MByte)
 Full featured SDK  Supports rapid application development
Applications  Peak finding, signature analysis, general purpose computing, etc.
 Cooling 
 Type  Thermo-electric to -15 °C (from 20 °C ambient) +/- .1 °C
 Communications 
 USB  Supports USB 2.0
 Ethernet  Supports full TCP / UDP stack over 10 / 100 Base T
 Digital I/O  Supports external triggering and control of outboard devices
Mount
 Mounts  Several standard mounts available.  Please contact factory
Environment
Temperature  0 °C to +50 °C
 Humidity  10% to 90% non-condensing
 Electrical
 Voltage  110V / 220V or 12-24 VDC
Mechanical
 Dimensions  98 mm x 100 mm x 90 mm  (3.86" x 3.94" x 3.54")
 Weight  750 g  (26 oz.)